This is a short video of our 1993 Bridgeport Discovery 308 CNC vertical machining center as taken from an east coast machine shop with 4000 RPM spindle, coolant system, full enclosure and an 8 station auto tool changer. This machine is currently available for sale and is under power for inspection on our warehouse floor. Should you have any questions about this machine that are not answered by the video, you may contact us at 262-854-5054 or [email protected]. Full specifications of this machine are listed below. Thank you.
BRIDGEPORT DISCOVERY 308 CNC VERTICAL MACHINING CENTER
GENERAL SPECIFICATIONS:
DATE OF MANUFACTURE 2/1993
TABLE SIZE 41.7″ x 14.76″
MAX. TABLE LOAD (EVENLY DISTRIB.) 750 LBS
SPINDLE NOSE TO TABLE TOP 4″ – 24″
X AXIS TRAVEL 17.7″
Y AXIS TRAVEL 12.2″
Z AXIS TRAVEL 16.1″
RAPID TRAVERSE RATE X & Y AXES 400 IPM
RAPID TRAVERSE RATE Z AXIS 300 IPM
CUTTING FEED RATE ALL AXES 0.1 – 200 IPM
SPINDLE SPEEDS 0 – 4,000 RPM
SPINDLE TAPER BT 30
SPINDLE MOTOR 5 HP
TOOL CHANGER CAPACITY 8 STATIONS
MAX. TOOL WEIGHT 12 LBS
APPROX. DIMENSIONS 82″ x 94″ x 89″
APPROX. WEIGHT 6,000 LBS
EQUIPPED WITH:
BRIDGEPORT DX-32 CNC CONTROL W/12″ CRT SCREEN
RS-232C PORT INTERFACE FOR DNC OPERATION
8 STATION AUTOMATIC UMBRELLA TOOL CHANGER
STANDARD COOLANT SYSTEM WITH TANK & PUMP
FULLY ENCLOSED GUARDS, ALL AVAILABLE MANUALS
LOCATION: ON OUR WAREHOUSE FLOOR UNDER POWER
source