This is an advert I made for the new version of my CNC milling G-Code programming course.
For more info, check out my website: https://gcodetutor.com/fanuc-training-course.html
I made the original course 2 years ago. I had such an amazingly positive response.
Since then I have sold nearly 3000 courses and have had a lot of feedback from students.
Based on that feedback, I started remaking the courses again and gave them free to the students that enrolled in the first version of the course.
Working 50 hours a week for 3 months, this CNC milling programming course was finally ready for release.
Before I started, I sought advice not just from my students, but also professional visual designers, presenters, fellow successful course instructors, content creators and of course mechanical engineers and machine tool programmers to bring you the best possible learning experience I can.
This CNC milling course is the result of two years of hard work.
Let’s take your career to the next level.
Marc – GCodeTutor.
You can enroll here: https://gcodetutor.com/fanuc-training-course.html
————————————————————————————————————————————————-
CNC MILLING MACHINE PROGRAMMING V2.0 – CURRICULUM
— OVER 3 HOURS OF ONLINE TUITION COVERING EVERY TECHNIQUE YOU NEED TO MASTER PROGRAMMING YOUR CNC MILL —
Introduction (2:35)
Important information before taking this course
The basics (14:39)
Programming G-Code
Laying out the header information (7:45)
The Safetyline (5:59)
Setting the datum (7:16)
Setting the planes using G17, G18 and G19 (5:38)
Programming a basic profile (16:46)
Helical milling (9:25)
G28 Reference Return (5:10)
Canned cycles
G81 drilling cycles (12:00)
G82 counter boring (4:52)
G83 peck drilling (8:51)
G84 tapping cycle (7:33)
G85 and G86 boring cycles (4:42)
Object avoidance with G98 & G99 (7:00)
Programming a complete part
The bracket – planning (4:51)
The bracket – Face milling (9:23)
The bracket – Spot drilling (6:01)
The bracket – Peck drilling (7:46)
The bracket – Tapping (7:18)
The bracket – Machining the pocket (8:33)
The bracket – The profile (8:18)
source