Author name: G-Code Tutor

CNC Lathe Machine

CNC Lathe G-Code Programming course V2.0

Learning to program CNC Lathes with G-Code is the best way to climb the ladder in a machine shop. Course available here: https://gcodetutor.com/cnc-machine-training.html Not only will you earn more money but you will also gain full control and understanding over how these machines can produce any part imaginable. This remake of the best selling CNC […]

CNC Milling Machine

cnc milling machine programming with G-Code V2.0

This is an advert I made for the new version of my CNC milling G-Code programming course. For more info, check out my website: https://gcodetutor.com/fanuc-training-course.html I made the original course 2 years ago. I had such an amazingly positive response. Since then I have sold nearly 3000 courses and have had a lot of feedback

CNC Lathe Machine

Programming a CNC Lathe using G83 and G73 drilling cycles

From the course CNC Lathe Programming using G-Code available from https://gcodetutor.com. In this lesson, I demonstrate how to drill a hole on the centreline of the component using three different techniques. G01 normal without pecking, G83 Peck cycle command and G73 Chip peck drilling cycle. I explain how the G Codes work and when to

CNC Cutting Machine

Basic G-Code programming for CNC routers

This lesson is part of a 3-hour course for CNC router owners available here: https://gcodetutor.com/cnc-router-programming.html The best way to learn G-Code is to dive in and write a program. Here I write a full sequence using the simplified version of G-Code used on affordable hobbyist CNC routers that are becoming a popular tool for the

CNC Routers

CNC Router Tips: The first line of every G-Code program

CNC Router programming using Fusion 360 and G-Code from https://gcodetutor.com/cnc-router-programming.html A lesson from the course ‘CNC Router programming’ The safety line is the first line of code that we add to the start of the G-Code program and after each tool change. By adding this line, if we stop the CNC machine halfway through and

CNC Lathe Machine

Setting the datums on a CNC Lathe using G-Code

In this video, I talk about how and why we use datums and also how to set them within our G-Code program. For more G-Code training, head over to https://gcodetutor.com For more about setting datums including another free video, check out my article here: https://gcodetutor.com/fanuc-training-course/cnc-datums-g10-g53-g54.html Here is a 20% off coupon code for any course

Scroll to Top