Check out the Onefinity CNC Machine Here: https://www.onefinitycnc.com Download the files to make your own here: https://www.etsy.com/shop/benmyerswoodshop Become a Patreon Member! https://www.patreon.com/myerswoodshop There’s so many options when it comes to holding material down securely to your CNC machine it can feel overwhelming. In this video I’ll walk you through a whole bunch of choices (and […]
How to create a 3d topographical map on a CNC! Using a free program to convert google map data Rowdy Roman created an .stl of Ketchikan, Alaska. I then put it into @vectric Aspire and turned the .stl into a 3d toolpaths for my @OnefinityCNC ! We poured some epoxy to be the ocean and
First 3D Carve On The Onefinity CNC machine. I used Vetric Aspire to carve my face scan .stl. It’s tiny, about the size of a quarter and hard to capture on camera with size and contrast. Onefinity sent me the machine for review TOOLS / MATERIALS ■ Onefinity CNC Machine : https://www.onefinitycnc.com ■ Amana Tool
A 4×4 piece of wood is too big to carve the way the Shapeoko comes from the factory, so you have to raise the router up in its cradle to accommodate it. Here, I engrave the letter of the owners last name into the table legs. TOOLS / MATERIALS ■ Shapeoko : www.carbide3d.com ■ Rockler
Using carbide create, I cut out a door hanger of an Arkansas state and a razorback using 1/4 birch plywood. total cut time was 3 minutes real time. I use a 1/8 compression bit at 40 ipm at full depth in one pass with no tabs. TOOLS / MATERIALS ■ Amana 1/8 Spektra Compression Bit