I applied the machining operations in CAMBAM. However, I did not do it correctly as you will see right after I make the first cut. In this video, you will see me cut out all of the shelves/levels of the vertical parts holder. All of the levels are cleaned up.
I upload to Instagram very frequently and add great informative content as well as customer test videos. Make sure to follow me on Instagram at:
https://www.instagram.com/buildyourcnc_newbiehack/
CAMBAM Software:
https://buildyourcnc.com/item/CAM-SOFTWARE-cambam
I use this CAM software for my purposes. I personally like the simple user interface and I am able to understand the parameters from years of experience, so I don’t need CAM software that explains what the parameters mean.
Mach3 CNC Control Software:
https://buildyourcnc.com/item/control-SOFTWARE-mach3
This is the software I use with my CNC router.
The greenBullv2 60 degree 4’x8′ CNC Router:
https://buildyourcnc.com/item/cnc-machine-greenbullv2-milling-laser
This is CNC router that I use in my shop and is my favorite as it can also house a laser gantry and it is a great space saver. It takes up the same amount of space as a typical 4’x8′ machine, but it is intended to be pushed up against a wall so only one side of the machine needs to be accessed.
All of these machines and software can be purchased at BuildYourCNC.com
https://buildyourcnc.com/
source