MASTERWOOD MW-280 CNC NESTING CNC MACHINE FT-320009
https://www.exfactoryauctions.com/AuctionDetail.aspx?recnum=FT-320009
Working Capacity:
Work Table; “X” axis 2,900 mm (114.17″), “Y” axis 1,560 mm (61.4″) width, Boring Pattern; “X” axis max. 2,830 mm (111.41”) all drills, “Y” axis max. 1,426 mm (56.14”), “Z” axis max. 220 mm (8.7”), Max Panel Thickness 150 mm (5.9”); Router Working Dimensions; “Z” axis max. 2,950 mm (116”), “Y” axis max. 1,560 mm (61.41”), Negative Y axis -194 mm (7.63)
Boring Unit: (16) independent spindle-boring block, (10) vertical spindles spaced on 32 mm centers with (8) spindles in the X-axis and 3 spindles in the Y-axis, includes (4) horizontal spindles in the X-axis as well as (2) in the Y-axis. Spindles driven by a 2 HP motor at 4,000 RPM, each spindle has four bearings that are pneumatically actuated, boring head comes with X-axis grooving saw that turns a 115 mm diameter saw at 4,000 RPM. 10.5 HP electro-spindle mounted in the rear position on the gantry with a 1,000 – 24,000 RPM variable speed motor, left-hand or right-hand rotation controlled by the computer. Electro-spindle has an independent thermostatically controlled cooling fan with ceramic bearings, including ISO 30 Cone Tool Holders and 8-position tool carrier mounted on the gantry.
Work Table: (2) working zones equipped with front & rear reference stops, front & rear stops are actuated and spoil board is positioned against the rear stops
Operator & Machine Control: Dell PC with an Intel Pentium 4 Processor, 20.0 Hard Drive with 128MB of RAM, 256K Full speed cache memory, 8 MB video memory along with Networking capabilities, and Windows 98 operating system
Equipped with: 15” color monitor, RS-232 serial port, 24X CD-ROM NAD 3.5” 1.44 MB floppy drive
Complete with: 250m³ Becker Oil-less Vacuum Pump
NOTE: Needs a stand-alone computer to operate
Machine State: Not in use, but still under Power
Inspection: Available for Inspection (By Appointment Only)
source